Posted on

Plug-in solar needs smarter rules

This post summarizes an article co-authored by Jigar Shah and CraftStrom CEO Stephan Scherer. Read the full piece on LinkedIn here.

Plug‑in solar is having a moment in the U.S. For the first time, multiple states are actively debating how to treat small, consumer-installed solar systems—sometimes called balcony solar or plug‑and‑play solar. That’s great news for energy affordability, because plug‑in solar can help households reduce daytime grid consumption without the cost and complexity of traditional rooftop installs.

But there’s a risk: if lawmakers copy-paste the rules built for full rooftop solar—or focus on the wrong constraints—we’ll accidentally regulate plug‑in solar out of existence.

Our core argument in the full article is simple:

The policy mistake: confusing two different questions

Most proposed rules treat plug‑in solar as if it’s automatically a “grid-exporting generator.” That blends together two separate concerns:

  1. Home safety (Is the device safe to connect to household wiring?)
  2. Grid export (Will it push power back onto the utility grid, and under what conditions?)

When those get mixed, the default “solution” becomes a blunt one: cap the system size in watts. But a watt cap doesn’t directly answer either question well. It can still allow unsafe setups, and it can still create grid concerns—while also unnecessarily limiting the customer’s ability to offset their own usage.

The better approach: regulate export (if any), not self-consumption

Plug‑in solar is primarily about self-consumption—power that is used behind the meter to reduce what a home draws from the grid. If the policy goal is to protect the grid, the most precise lever is export behavior, not panel size.

That means policymakers can create clearer, more workable rules by separating the framework into two tracks:

1) Home safety: treat plug‑in solar like a consumer electrical product

Home safety should be anchored in established electrical safety practices (think: equipment standards and code-aligned installation requirements), so customers and regulators have confidence that systems operate predictably and safely.

2) Grid protection: set clear rules for “no export” (or limited export)

If a system is designed and configured to avoid export, then the utility-facing process should be lightweight—closer to a notification/registration model than a full interconnection study designed for much larger systems.

Why this matters

If plug‑in solar is regulated in a fit-for-purpose way, it can become a practical affordability tool:

  • Faster adoption (weeks → days)
  • Lower soft costs (less paperwork, fewer delays)
  • More access for people who can’t do rooftop solar
  • More predictable outcomes for utilities (clear export expectations)

Read the full article

This blog post is only the gist. The full argument, with the full context and policy framing, is in the original LinkedIn article co-authored by Jigar Shah and Stephan Scherer:
“Plug-in solar needshttps://www.linkedin.com/pulse/plug-in-solar-needs-smarter-rules-just-smaller-ones-jigar-shah-eu7ge/?trackingId=m5Y%2FvNYyRU%2B%2BkZXwbAJcOA%3D%3D smarter rules — just smaller ones”

SHARE

FAQ

Frequently Asked Questions

Will it work with my outlet and circuit?

Most homes use a standard outdoor or indoor outlet on a circuit without heavy loads. Load Guard watches your home's use and turns output down to stay within the safe circuit limit. Run our 5-point outlet check before you buy.

Will it save enough to be worth it?

Tell us your bill and we'll show three numbers: conservative, typical and best-case. Savings come from using the power at home during the day.

Where can I put it?

Anywhere with 4+ hours of direct sun near an outlet: balcony, fence, deck, porch, shed or yard. The kit finder asks about your spot and cable run.

Will it run my house in an outage?

Solar alone lowers your bill but doesn't power your home when the grid is down. Add a battery kit to keep essentials like the fridge, lights and Wi-Fi running.

Is it allowed where I live?

Yes. CraftStrom works in all 50 states. Load Guard keeps every watt in your home, so nothing flows back to the grid.

What happens to extra power?

Your home uses solar first. If you're making more than you use, Load Guard turns the panels down, or a battery stores it for later.

What will I pay and when will it arrive?

See your full price, shipping and delivery window before checkout. No surprise accessories.

Can I take it with me?

Yes. It unplugs and moves with you, and it works in all 50 states.

Can I trust the equipment?

UL-certified inverters, NEC compliant, tested by Lawrence Berkeley National Lab and NREL, with warranties of up to 20 years.

What if I get stuck?

Our Houston team can walk you through Load Guard setup or Wi-Fi by appointment, and our FAQ covers the rest. Call (832) 850-3832.

More questions? Call (832) 850-3832 or email us.

Solar Calculator